~vejnar/doc-website

a07787975f58cfc58da96cb907b2e66a5af27c70 — vejnar 2 months ago 9cf1665
Update Limine config
1 files changed, 10 insertions(+), 6 deletions(-)

M content/doc/os/install_archlinux/_index.md
M content/doc/os/install_archlinux/_index.md => content/doc/os/install_archlinux/_index.md +10 -6
@@ 119,6 119,10 @@ Configuration files are [available](files) for download.
        * Configure Limine. See [CONFIG.md](https://github.com/limine-bootloader/limine/blob/trunk/CONFIG.md) for more help.
            * Copy [limine.cfg](files/limine.cfg) in `/boot`
            * By default, font size is doubled using `TERM_FONT_SCALE=2x2`. On HiDPI monitors, increasing to `TERM_FONT_SCALE=4x4` may be preferred.
            * By default, Limine will run with the first entry (line starting with `:`) in `limine.cfg`. To select a different default entry, for example the 2nd entry, add in the header section before the entries:
                ```
                DEFAULT_ENTRY=2
                ```
            * On multi-GPU system, Limine may have problem detecting the active GPU. While system will boot normally, Limine screen will remain blank. Adding `SERIAL=yes` below `TIMEOUT` fixes the problem.

        * Configure microcode. In `/boot/limine.cfg`, before the initramfs `MODULE_PATH` line, add the line:


@@ 133,21 137,21 @@ Configuration files are [available](files) for download.

        * Microsoft Windows: Limine can chainload the Windows bootloader.
            * If Linux and Windows have each their own ESP (for example if Linux and Windows were installed on separate drives):
                1. Label the Windows `ESP` partition (Windows ESP label is only set in the GPT, not on the filesystem) using for example for drive `/dev/nvme1n1p2` (use `lsblk` to identify drive):
                1. Label the Windows `ESP` partition (Windows ESP label is only set in the GPT, not on the filesystem) using for example for drive `/dev/nvme1n1p1` (use `lsblk` to identify drive):
                    ```bash
                    fatlabel /dev/nvme1n1p2 ESPWIN
                    fatlabel /dev/nvme1n1p1 ESPWIN
                    ```
                2. Add in `limine.cfg`:
                    ```
                    :Windows
                    PROTOCOL=chainload
                    IMAGE_PATH=fslabel://ESPWIN/EFI/Microsoft/Boot/bootmgfw.efi
                        PROTOCOL=chainload
                        IMAGE_PATH=fslabel://ESPWIN/EFI/Microsoft/Boot/bootmgfw.efi
                    ```
            * If Linux and Windows share a common ESP, add in `limine.cfg`:
                ```
                :Windows
                PROTOCOL=chainload
                IMAGE_PATH=boot://1/EFI/Microsoft/Boot/bootmgfw.efi
                    PROTOCOL=chainload
                    IMAGE_PATH=boot://1/EFI/Microsoft/Boot/bootmgfw.efi
                ```
            * Turn-off *Fast Startup*