~sungo/gremlin

9e6344ae43493d909c555dba76daee6353547115 — sungo 4 months ago a703663
set the trigger height to what should be the right value and update calibration based on it
1 files changed, 5 insertions(+), 4 deletions(-)

M sys/config.g
M sys/config.g => sys/config.g +5 -4
@@ 12,8 12,9 @@ M550 P"Gremlin"                                       ; set printer name
;M666 X0 Y0 Z0                                         ; put your endstop adjustments here, or let auto calibration find them

; From G32 calibration
M665 L400.280:400.280:400.280 R165.926 H521.224 B145.0 X0.090 Y0.117 Z0.000
M666 X0.575 Y-0.051 Z-0.523 A0.00 B0.00
M665 L400.280:400.280:400.280 R165.788 H520.063 B145.0 X0.045 Y0.139 Z0.000
M666 X0.541 Y0.025 Z-0.566 A0.00 B0.00

; Network
M552 S1                                               ; enable network
M586 P0 S1                                            ; enable HTTP


@@ 44,7 45,7 @@ M574 Z2 S1 P"zstop"                                   ; configure switch-type (e

; Z-Probe
M558 P8 R0.4 C"zprobe.in+zprobe.mod" H10 F1200 T18000 ; set Z probe type to effector and the dive height + speeds
G31 P500 X0 Y0 Z1.1                                   ; set Z probe trigger value, offset and trigger height
G31 P500 X0 Y0 Z0                                   ; set Z probe trigger value, offset and trigger height
M557 R140 S15                                         ; define mesh grid

; Heaters


@@ 70,7 71,7 @@ M106 P1 S1 H1 T50                                     ; set fan 1 value. Thermos
M563 P0 D0 H1 F0                                      ; define tool 0

; Offset probed
G10 P0 X0 Y0 Z0.06                                    ; set tool 0 axis offsets
G10 P0 X0 Y0 Z0                                       ; set tool 0 axis offsets
G10 P0 R0 S0                                          ; set initial tool 0 active and standby temperatures to 0C

; Miscellaneous