~sircmpwn/linux

linux/arch/arm/boot/dts/tegra124-apalis-eval.dts -rw-r--r-- 4.7 KiB
a99d8080 — Linus Torvalds Linux 5.4-rc6 11 months ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
 * Copyright 2016-2019 Toradex AG
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "tegra124-apalis.dtsi"

/ {
	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
		     "nvidia,tegra124";

	aliases {
		rtc0 = "/i2c@7000c000/rtc@68";
		rtc1 = "/i2c@7000d000/pmic@40";
		rtc2 = "/rtc@7000e000";
		serial0 = &uarta;
		serial1 = &uartb;
		serial2 = &uartc;
		serial3 = &uartd;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	pcie@1003000 {
		pci@1,0 {
			status = "okay";
		};
	};

	host1x@50000000 {
		hdmi@54280000 {
			status = "okay";
			hdmi-supply = <&reg_5v0>;
		};
	};

	/* Apalis UART1 */
	serial@70006000 {
		status = "okay";
	};

	/* Apalis UART2 */
	serial@70006040 {
		status = "okay";
	};

	/* Apalis UART3 */
	serial@70006200 {
		status = "okay";
	};

	/* Apalis UART4 */
	serial@70006300 {
		status = "okay";
	};

	pwm@7000a000 {
		status = "okay";
	};

	/*
	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
	 * board)
	 */
	i2c@7000c000 {
		status = "okay";
		clock-frequency = <400000>;

		pcie-switch@58 {
			compatible = "plx,pex8605";
			reg = <0x58>;
		};

		/* M41T0M6 real time clock on carrier board */
		rtc@68 {
			compatible = "st,m41t0";
			reg = <0x68>;
		};
	};

	/*
	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
	 */
	i2c@7000c400 {
		status = "okay";
	};

	/*
	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
	 * on carrier board)
	 */
	i2c@7000c500 {
		status = "okay";
		clock-frequency = <400000>;
	};

	/* I2C4 (DDC): unused */

	/* SPI1: Apalis SPI1 */
	spi@7000d400 {
		status = "okay";
		spi-max-frequency = <50000000>;
	};

	/* SPI4: Apalis SPI2 */
	spi@7000da00 {
		status = "okay";
		spi-max-frequency = <50000000>;
	};

	/* Apalis Serial ATA */
	sata@70020000 {
		status = "okay";
		target-5v-supply = <&reg_5v0>;
		target-12v-supply = <&reg_12v0>;
	};

	hda@70030000 {
		status = "okay";
	};

	usb@70090000 {
		status = "okay";
	};

	/* Apalis MMC1 */
	sdhci@700b0000 {
		status = "okay";
		bus-width = <4>;
		/* MMC1_CD# */
		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
		vqmmc-supply = <&vddio_sdmmc1>;
	};

	/* Apalis SD1 */
	sdhci@700b0400 {
		status = "okay";
		bus-width = <4>;
		/* SD1_CD# */
		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
		vqmmc-supply = <&vddio_sdmmc3>;
	};

	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
	usb@7d000000 {
		status = "okay";
		dr_mode = "otg";
	};

	usb-phy@7d000000 {
		status = "okay";
		vbus-supply = <&reg_usbo1_vbus>;
	};

	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
	usb@7d004000 {
		status = "okay";
	};

	usb-phy@7d004000 {
		status = "okay";
		vbus-supply = <&reg_usbh_vbus>;
	};

	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
	usb@7d008000 {
		status = "okay";
	};

	usb-phy@7d008000 {
		status = "okay";
		vbus-supply = <&reg_usbh_vbus>;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		brightness-levels = <255 231 223 207 191 159 127 0>;
		default-brightness-level = <6>;
		/* BKL1_ON */
		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
		power-supply = <&reg_3v3>;
		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
	};

	gpio-keys {
		compatible = "gpio-keys";

		wakeup {
			label = "WAKE1_MICO";
			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WAKEUP>;
			debounce-interval = <10>;
			wakeup-source;
		};
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3.3V_SW";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_5v0: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "5V_SW";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_12v0: regulator-12v0 {
		compatible = "regulator-fixed";
		regulator-name = "12V_SW";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	/* USBO1_EN */
	reg_usbo1_vbus: regulator-usbo1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "VCC_USBO1";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&reg_5v0>;
	};

	/* USBH_EN */
	reg_usbh_vbus: regulator-usbh-vbus {
		compatible = "regulator-fixed";
		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&reg_5v0>;
	};
};

&gpio {
	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
	pex-perst-n {
		gpio-hog;
		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "PEX_PERST_N";
	};
};