~sircmpwn/linux

linux/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi -rw-r--r-- 6.2 KiB
a99d8080 — Linus Torvalds Linux 5.4-rc6 11 months ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
 */

/dts-v1/;
#include "imx27.dtsi"

/ {
	model = "Eukrea CPUIMX27";
	compatible = "eukrea,cpuimx27", "fsl,imx27";

	memory@a0000000 {
		device_type = "memory";
		reg = <0xa0000000 0x04000000>;
	};

	clk14745600: clk-uart {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <14745600>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pcf8563@51 {
		compatible = "nxp,pcf8563";
		reg = <0x51>;
	};
};

&nfc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_nfc>;
	nand-bus-width = <8>;
	nand-ecc-mode = "hw";
	nand-on-flash-bbt;
	status = "okay";
};

&owire {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_owire>;
	status = "okay";
};

&sdhci2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sdhc2>;
	bus-width = <4>;
	non-removable;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	uart-has-rtscts;
	status = "okay";
};

&usbh2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbh2>;
	dr_mode = "host";
	phy_type = "ulpi";
	disable-over-current;
	status = "okay";
};

&usbotg {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	dr_mode = "otg";
	phy_type = "ulpi";
	disable-over-current;
	status = "okay";
};

&weim {
	status = "okay";

	nor: nor@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "cfi-flash";
		reg = <0 0x00000000 0x04000000>;
		bank-width = <2>;
		linux,mtd-name = "physmap-flash.0";
		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
	};

	uart8250@3,200000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart8250_1>;
		compatible = "ns8250";
		clocks = <&clk14745600>;
		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
		reg = <3 0x200000 0x1000>;
		reg-shift = <1>;
		reg-io-width = <1>;
		no-loopback-test;
	};

	uart8250@3,400000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart8250_2>;
		compatible = "ns8250";
		clocks = <&clk14745600>;
		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
		reg = <3 0x400000 0x1000>;
		reg-shift = <1>;
		reg-io-width = <1>;
		no-loopback-test;
	};

	uart8250@3,800000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart8250_3>;
		compatible = "ns8250";
		clocks = <&clk14745600>;
		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
		reg = <3 0x800000 0x1000>;
		reg-shift = <1>;
		reg-io-width = <1>;
		no-loopback-test;
	};

	uart8250@3,1000000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart8250_4>;
		compatible = "ns8250";
		clocks = <&clk14745600>;
		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
		reg = <3 0x1000000 0x1000>;
		reg-shift = <1>;
		reg-io-width = <1>;
		no-loopback-test;
	};
};

&iomuxc {
	imx27-eukrea-cpuimx27 {
		pinctrl_fec: fecgrp {
			fsl,pins = <
				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
				MX27_PAD_ATA_DATA13__FEC_COL		0x0
				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX27_PAD_I2C_DATA__I2C_DATA		0x0
				MX27_PAD_I2C_CLK__I2C_CLK		0x0
			>;
		};

		pinctrl_nfc: nfcgrp {
			fsl,pins = <
				MX27_PAD_NFRB__NFRB			0x0
				MX27_PAD_NFCLE__NFCLE			0x0
				MX27_PAD_NFWP_B__NFWP_B			0x0
				MX27_PAD_NFCE_B__NFCE_B			0x0
				MX27_PAD_NFALE__NFALE			0x0
				MX27_PAD_NFRE_B__NFRE_B			0x0
				MX27_PAD_NFWE_B__NFWE_B			0x0
			>;
		};

		pinctrl_owire: owiregrp {
			fsl,pins = <
				MX27_PAD_RTCK__OWIRE			0x0
			>;
		};

		pinctrl_sdhc2: sdhc2grp {
			fsl,pins = <
				MX27_PAD_SD2_CLK__SD2_CLK		0x0
				MX27_PAD_SD2_CMD__SD2_CMD		0x0
				MX27_PAD_SD2_D0__SD2_D0			0x0
				MX27_PAD_SD2_D1__SD2_D1			0x0
				MX27_PAD_SD2_D2__SD2_D2			0x0
				MX27_PAD_SD2_D3__SD2_D3			0x0
			>;
		};

		pinctrl_uart4: uart4grp {
			fsl,pins = <
				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
				MX27_PAD_USBH1_FS__UART4_RTS		0x0
			>;
		};

		pinctrl_uart8250_1: uart82501grp {
			fsl,pins = <
				MX27_PAD_USB_PWR__GPIO2_23		0x0
			>;
		};

		pinctrl_uart8250_2: uart82502grp {
			fsl,pins = <
				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
			>;
		};

		pinctrl_uart8250_3: uart82503grp {
			fsl,pins = <
				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
			>;
		};

		pinctrl_uart8250_4: uart82504grp {
			fsl,pins = <
				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
			>;
		};

		pinctrl_usbh2: usbh2grp {
			fsl,pins = <
				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
				MX27_PAD_USBH2_STP__USBH2_STP		0x0
				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
			>;
		};
	};
};