~sircmpwn/linux

linux/arch/arm/boot/dts/exynos4412-tiny4412.dts -rw-r--r-- 1.6 KiB
a99d8080 — Linus Torvalds Linux 5.4-rc6 11 months ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
// SPDX-License-Identifier: GPL-2.0
/*
 * FriendlyARM's Exynos4412 based TINY4412 board device tree source
 *
 * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
 *
 * Device tree source file for FriendlyARM's TINY4412 board which is based on
 * Samsung's Exynos4412 SoC.
 */

/dts-v1/;
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "FriendlyARM TINY4412 board based on Exynos4412";
	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";

	chosen {
		stdout-path = &serial_0;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0x40000000 0x40000000>;
	};

	leds {
		compatible = "gpio-leds";

		led1 {
			label = "led1";
			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
			default-state = "off";
			linux,default-trigger = "heartbeat";
		};

		led2 {
			label = "led2";
			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		led3 {
			label = "led3";
			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		led4 {
			label = "led4";
			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
			default-state = "off";
			linux,default-trigger = "mmc0";
		};
	};

	fixed-rate-clocks {
		xxti {
			compatible = "samsung,clock-xxti";
			clock-frequency = <0>;
		};

		xusbxti {
			compatible = "samsung,clock-xusbxti";
			clock-frequency = <24000000>;
		};
	};
};

&rtc {
	status = "okay";
};

&sdhci_2 {
	bus-width = <4>;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&serial_0 {
	status = "okay";
};

&serial_1 {
	status = "okay";
};

&serial_2 {
	status = "okay";
};

&serial_3 {
	status = "okay";
};