~sircmpwn/linux

linux/arch/arm/boot/dts/at91-wb45n.dtsi -rw-r--r-- 2.8 KiB
a99d8080 — Linus Torvalds Linux 5.4-rc6 11 months ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
// SPDX-License-Identifier: GPL-2.0
/*
 * at91-wb45n.dtsi - Device Tree file for WB45NBT board
 *
 *  Copyright (C) 2018 Laird
 *
 */

#include "at91sam9g25.dtsi"

/ {
	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";

	chosen {
		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0x20000000 0x4000000>;
	};

	atheros {
		compatible = "atheros,ath6kl";
		atheros,board-id = "SD32";
	};
};

&reset_controller {
	compatible = "atmel,sama5d3-rstc";
};

&shutdown_controller {
	atmel,wakeup-mode = "low";
};

&slow_xtal {
	clock-frequency = <32768>;
};

&main_xtal {
	clock-frequency = <12000000>;
};

&ebi {
	status = "okay";
	nand_controller: nand-controller {
		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
		pinctrl-names = "default";
		status = "okay";

		nand@3 {
			reg = <0x3 0x0 0x800000>;
			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
			nand-bus-width = <8>;
			nand-ecc-mode = "hw";
			nand-ecc-strength = <4>;
			nand-ecc-step-size = <512>;
			nand-on-flash-bbt;
			label = "atmel_nand";

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				at91bootstrap@0 {
					label = "at91bs";
					reg = <0x0 0x20000>;
				};

				uboot@20000 {
					label = "u-boot";
					reg = <0x20000 0x80000>;
				};

				ubootenv@a0000 {
					label = "u-boot-env";
					reg = <0xa0000 0x20000>;
				};

				ubootenv@c0000 {
					label = "redund-env";
					reg = <0xc0000 0x20000>;
				};

				kernel-a@e0000 {
					label = "kernel-a";
					reg = <0xe0000 0x280000>;
				};

				kernel-b@360000 {
					label = "kernel-b";
					reg = <0x360000 0x280000>;
				};

				rootfs-a@5e0000 {
					label = "rootfs-a";
					reg = <0x5e0000 0x2600000>;
				};

				rootfs-b@2be0000 {
					label = "rootfs-b";
					reg = <0x2be0000 0x2600000>;
				};

				user@51e0000 {
					label = "user";
					reg = <0x51e0000 0x2dc0000>;
				};

				logs@7fa0000 {
					label = "logs";
					reg = <0x7fa0000 0x60000>;
				};

			};
		};
	};
};

&usb0 {
	num-ports = <2>;
	atmel,vbus-gpio = <
		&pioB 12 GPIO_ACTIVE_HIGH
		&pioA 31 GPIO_ACTIVE_HIGH
		>;
	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
};

&macb0 {
	phy-mode = "rmii";
};

&spi0 {
	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
};

&usb2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_board_usb2>;
	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
};

&mmc0 {
	pinctrl-0 = <
		&pinctrl_mmc0_slot0_clk_cmd_dat0
		&pinctrl_mmc0_slot0_dat1_3>;
	slot@0 {
		reg = <0>;
		bus-width = <4>;
	};
};

&pinctrl {
	usb2 {
		pinctrl_board_usb2: usb2-board {
			atmel,pins =
				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
		};
	};
};