~craftyguy/Adv360-Pro-ZMK

9a5d22ca99cbb57f4ff28abbbf7c9b88eafceb6e — Tom Plunket 1 year, 3 months ago 603133f
Refine wording of steps in firmware flashing.
1 files changed, 9 insertions(+), 6 deletions(-)

M README.md
M README.md => README.md +9 -6
@@ 47,16 47,19 @@ Follow the programming instruction on page 8 of the [Quick Start Guide](https://
### briefly

1. Extract the firmwares from the downloaded archive.
1. Connect the keyboards via USB.
1. Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive. (There's also a physical button between the Delete/Home/End keys.)
1. Connect the left side keyboard to USB.
1. Press Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive.
1. Copy `left.uf2` to the USB drive and it will disconnect.
1. Power off both keyboards (by unplugging them and making sure the switch is off).
1. Restart the left then the right keyboard.
1. Mod+macro3 to put the right side into bootloader mode. (There's also a physical button between the Enter/PgUp/PgDn keys.)
1. Power off both keyboards (by unplugging them and making sure the switches are off).
1. Turn on the left side keyboard with the switch.
1. Connect the right side keyboard to USB to power it on.
1. Press Mod+macro3 to put the right side into bootloader mode to attach it as a USB drive.
1. Copy `right.uf2` to the mounted drive.
1. Keyboard may need to be power cycled again.
1. Unplug the right side keyboard and turn it back on.
1. Enjoy!

> Note: There are also physical reset buttons on both keyboards which can be used to enter and exit the bootloader mode. Their location is described in section 2.7 on page 9 in the [User Manual](https://kinesis-ergo.com/wp-content/uploads/Advantage360-ZMK-KB360-PRO-Users-Manual-v3-10-23.pdf) and use is described in section 5.9 on page 14. 

## Other support

Further support resources can be found on Kinesis.com: